Search
Sharkbite
Sharkbite is a low-lead DZR push-fit range from RWC which is demountable from the pipe with the use of a simple tool. The system provides quick and easy install in both wet and dry conditions with heat free installation, ideal for use where flame jointing is not permitted. All fittings are electrically continuous when used in conjunction with metal pipes. The material used to manufacture the fittings is low-lead DZR compliant with European Drinking Water Directive 98/83/EC and is WRAS approved.
15mm Sharkbite Depth Marker/Disconnecting Clip
SB2915
Sharkbite Combination Depth Marker & Disconnecting Clip ensures that pipe is not only inserted correctly into the fitting but also makes disconnection hassle free.
22mm Sharkbite Depth Marker/Disconnecting Clip
SB2922
Sharkbite Combination Depth Marker & Disconnecting Clip ensures that pipe is not only inserted correctly into the fitting but also makes disconnection hassle free.
15mm Sharkbite Coupling # USE TSM15N INSERT ON PEX PIPE #
SB0115
Sharkbite brass push-fit coupling for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm Sharkbite End Stop
SB0415
Sharkbite brass push-fit end stop for capping off pipework termination points. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
10mm Sharkbite End Stop
SB0410
Sharkbite brass push-fit end stop for capping off pipework termination points. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm Sharkbite 90 Deg Elbow # USE TSM15N INSERT ON PEX PIPE #
SB0215
Sharkbite brass push-fit coupling for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
10mm Sharkbite Coupling
SB0110
Sharkbite brass push-fit coupling for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm Sharkbite 90 Deg Street Elbow # USE TSM15N INSERT ON PEX PIPE #
SB0215ST
Sharkbite brass push-fit 90° Elbow for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
10mm Sharkbite 90 Deg Elbow
SB0210
Sharkbite brass push-fit 90° Elbow for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm x 10mm Sharkbite Straight Reducing Tails
SB211510
Sharkbite brass push-fit fitting for connecting 2 sharkbite fittings to create a reduced line size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
22mm x 15mm Sharkbite Straight Reducing Tails # USE TSM15N INSERT ON PEX PIPE #
SB212215
Sharkbite brass push-fit fitting for connecting 2 sharkbite fittings to create a reduced line size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm Sharkbite 45 Deg Elbow # USE TSM15N INSERT ON PEX PIPE #
SB0515
Sharkbite brass push-fit 45° Elbow for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm x 1/2" Sharkbite Tap Connector # USE TSM15N INSERT ON PEX PIPE #
SB141515
Sharkbite brass push-fit fitting for connecting pipework to a fixture or appliance. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm x 1/2" Sharkbite BSP Male Connector (Parallel Thread) # USE TSM15N INSERT ON PEX PIPE #
SB111515MP
Sharkbite brass push-fit fitting for connecting metric pipe to parallel female type connections. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
22mm Sharkbite Coupling
SB0122
Sharkbite brass push-fit coupling for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
22mm Sharkbite End Stop
SB0422
Sharkbite brass push-fit end stop for capping off pipework termination points. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm Sharkbite Tee # USE TSM15N INSERT ON PEX PIPE #
SB0315
Sharkbite brass push-fit Equal Tee for connecting 3 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm x 1/2" Sharkbite BSP Male Connector (Taper Thread) # USE TSM15N INSERT ON PEX PIPE #
SB111515MT
Sharkbite brass push-fit fitting for connecting metric pipe to tapered female type connections. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm Sharkbite Disconnecting Tongs
SB3015
Sharkbite Stainless Steel Disconnecting Tongs for demounted pipework from a Sharkbite fittings.
22mm Sharkbite Disconnecting Tongs
SB3022
Sharkbite Stainless Steel Disconnecting Tongs for demounted pipework from a Sharkbite fittings.
22mm Sharkbite 90 Deg Elbow
SB0222
Sharkbite brass push-fit coupling for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
22mm Sharkbite 90 Deg Street Elbow
SB0222ST
Sharkbite brass push-fit coupling for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
22mm Sharkbite 45 Deg Elbow
SB0522
Sharkbite brass push-fit 45° Elbow for connecting 2 pipes of equal size. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
15mm x 1/2" Sharkbite 90 Deg Male Elbow # USE TSM15N INSERT ON PEX PIPE #
SB121515M
Sharkbite brass push-fit 90° Male Elbow for connecting metric to BSP pipe connections. Suitable for hot, cold & central heating, copper, and plastic pipe (inserts required).
Payment options
