Plastic fittings can tolerate temperatures as low as -40°C and have good flow characteristics. This makes the fittings and systems a safe and secure choice for chilled or potable water, food and beverage applications in an commercial environment.
The systems do also have engineered valves to support the ABS/PVC systems.
BSP threaded reducing bush 3/4" x 1/2" rated to 16 bar. Polypropylene material approved by WRAS. A range of quality BSP threaded fittings made from Polypropylene and rated to 16 bar. Ideal replacement for gunmetal and bronze that will not corrode. We recommend the use of PTFE tape on all threaded fittings. WRAS Approved
BSP threaded reducing bush 1/2" x 3/8" rated to 16 bar. Polypropylene material approved by WRAS. A range of quality BSP threaded fittings made from Polypropylene and rated to 16 bar. Ideal replacement for gunmetal and bronze that will not corrode. We recommend the use of PTFE tape on all threaded fittings. WRAS Approved
BSP threaded reducing bush 3/4" x 3/8" rated to 16 bar. Polypropylene material approved by WRAS. A range of quality BSP threaded fittings made from Polypropylene and rated to 16 bar. Ideal replacement for gunmetal and bronze that will not corrode. We recommend the use of PTFE tape on all threaded fittings. WRAS Approved
Plasson Compression Fit Plastic Blanking Plug 20mm, ISO 17885 for Water Applications, AS/NZS 4129, ISO 7/1, BS 21, DIN 2999, UNI 9561, NEN 3258, AS 1722, DIN 8076, WRAS
BSP threaded reducing bush 1" x 1/2" rated to 16 bar. Polypropylene material approved by WRAS. A range of quality BSP threaded fittings made from Polypropylene and rated to 16 bar. Ideal replacement for gunmetal and bronze that will not corrode. We recommend the use of PTFE tape on all threaded fittings. WRAS Approved
BSP threaded reducing bush 1" x 3/4" rated to 16 bar. Polypropylene material approved by WRAS. A range of quality BSP threaded fittings made from Polypropylene and rated to 16 bar. Ideal replacement for gunmetal and bronze that will not corrode. We recommend the use of PTFE tape on all threaded fittings. WRAS Approved
Plasson Compression Fit Plastic Blanking Plug 25mm, ISO 17885 for Water Applications, AS/NZS 4129, ISO 7/1, BS 21, DIN 2999, UNI 9561, NEN 3258, AS 1722, DIN 8076, WRAS