The CORE brand is committed to providing a variety of HVAC products, all of which represent exceptional quality and true value. Offering customers a competitively priced, trusted alternative to other branded products across various HVAC applications.
"We are thrilled to announce the launch of CORE in 2023, which represents a new chapter in our commitment to innovation and customer service. We believe that CORE is a game-changer for customers servicing the in the HVAC industry," Steve Smith, Managing Director.
All manufacturers selected within the CORE range are trusted suppliers of SBS, so customers can be confident in the brand. With over 125 years of experience in the HVAC industry, SBS have the relevant skillset to understand the performance and pricing required for our valued customer based.
With the distribution network of SBS providing unrivalled service levels, you can trust CORE to be your go-to HVAC partner.
50nb (2") 2 Piece Brass Ball Valve Screwed BSP Parallel F/F Ends (ISO 228/1). Full bore, Anti-blow-out stem. Max Pressure 40 Bar (Liquids), 5 Bar (Gas). Working temperature -20°C to +140°C (Liquids), -20°C to +60°C (Gas). WRAS approved. EN331 approved (GAS).
50nb (2") 2 Piece DZR Ball Valve Full Bore, Screwed BSP Taper F/F Ends (ISO 7/1) or NPT (ANSI B1.20.1). Anti-blow-out stem, Max Pressure 40 Bar, Working temperature -20°C to +130°C, WRAS approved.
50nb (2”) Ductile Iron Butterfly Valve Lugged & Tapped, EPDM Liner, Stainless Steel Disc, Lockable Aluminium Handle. Max Pressure 16 Bar - Working temperature -10°C to +110°C - WRAS approved.
50mm Rubber Lined Clip M8/M10 (60-64mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
50nb CORE PN10-40 Inner Bolt Circle (IBC) PG-T Graphite Gasket 1.5mm - Excellent mechanical strength with a wide temperature range and outstanding stress retention properties making it ideal for demanding applications. Suitable for sealing a wide range of fluids including steam, hydrocarbons and most chemicals.
50mm (2") Flexible Flanged Carbon Steel Untied Rubber Bellow (EDPM) BS4504 PN6 - Designed for pressurised systems to reduce noise and handle vibrations as well as compensating for expansion and contraction during temperature fluctuations. Maximum Working Pressure 6 Bar - Working Temperature -10°C to +90°C. Suitable for L.T.H.W. and chilled water systems.
50mm (2") Flexible Flanged Carbon Steel Untied Rubber Bellow (EDPM) BS4504 PN16 - Designed for pressurised systems to reduce noise and handle vibrations as well as compensating for expansion and contraction during temperature fluctuations. Maximum Working Pressure 16 Bar - Working Temperature -10°C to +90°C. Suitable for L.T.H.W. and chilled water systems.
50mm (2") Flexible Carbon Steel Oval Flanged Tied Rubber Bellow Connector (EPDM) BS4504 PN16 - Designed for pressurised systems to compensate for misalignment, neutralise movement and reduce noise and vibrations. Maximum Working Pressure 10 Bar - Working Temperature -10°C to +90°C. Suitable for L.T.H.W. and chilled water systems.
50mm (2") Flexible Rubber Bellow (EPDM) BSP Female Threaded Union, Galvanised Carbon Steel Ends PN16 BS21. Maximum Working Pressure 16 Bar - Working Temperature -10°C to +90°C. Suitable for L.T.H.W. and chilled water systems.
(50nb) BSPP Pressure Reducing Valve (PRV) complete with gauge. Stainless steel cartridge filter. Maximum inlet 16 bar and outlet pressure range between 0.5 and 6 bar, preset to 3 bar, BS EN 1567 approved, WRAS approved.
50nb WRAS approved Screwed Axial bellow with 25 mm movement. Standard 10 Bar (up to 16 Bar - dependent on PED conditions). For steal and copper pipe systems 120°C
5.5 x 110mm CORE SDS Drill Bit - Suitable for work on building sites and general DIY tasks. It is compatible with all SDS rotary hammer drills and comes with a carbide tip which increases its performance.
5.0 x 110mm CORE SDS Drill Bit - Suitable for work on building sites and general DIY tasks. It is compatible with all SDS rotary hammer drills and comes with a carbide tip which increases its performance.
Cast Iron Swing Check Valve. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS5153 (BS EN558-1 Series 10). 16 Bar rated with a temperature range of. -10°C to +230°C
Ductile Iron PN16 Gate Valve. Flange mounting to EN1092-2 PN16. Face-to-face length to EN558-1 Series 3. Non-rising stem. Clockwise closing. 16 Bar rated & with temp range of 0°C to +80°C.
Cast Iron Flanged Y Strainer. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS EN558-1 Series 1. DN50 & DN65 square drain port. DN80-DN600 circular drain port. 16 Bar rated with a temperature range of -10°C to +230°C
Cast Iron Wafer Check Valve PN16. Universal flange mounting to suit BS EN1092 PN10 / PN16 and ANSI B16.1 Class 125. Epoxy coat finish. 16 Bar rated with working temp of -10°C to +120°C. WRAS application: -10°C to +85°C
450mm Galvanised Universal Cantilever Arm. Designed to primarily support and fix together Channel lengths in a metal framework situation. Made from Mild Steel with a 6mm think profile. Manufactured in accordance with BS6946:1988 - GB68450
45 Degree Galvanised Obtuse Angle Bracket. Designed to primarily support and fix together Channel lengths in a metal framework situation. Made from Mild Steel with a 6mm think profile. Manufactured in accordance with BS6946:1988. Pre drilled with 14mm fixing holes allowing the use of bolts and threaded rod to facilitate fixings - GB30
42mm x 35mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
42mm x 35mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
42mm x 35mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
By clicking ‘OK’ or by continuing to browse, you agree to the use and storing of cookies to enhance the website experience. To find out more about how we use the cookies click the ‘LEARN MORE’ button.
