The CORE brand is committed to providing a variety of HVAC products, all of which represent exceptional quality and true value. Offering customers a competitively priced, trusted alternative to other branded products across various HVAC applications.
"We are thrilled to announce the launch of CORE in 2023, which represents a new chapter in our commitment to innovation and customer service. We believe that CORE is a game-changer for customers servicing the in the HVAC industry," Steve Smith, Managing Director.
All manufacturers selected within the CORE range are trusted suppliers of SBS, so customers can be confident in the brand. With over 125 years of experience in the HVAC industry, SBS have the relevant skillset to understand the performance and pricing required for our valued customer based.
With the distribution network of SBS providing unrivalled service levels, you can trust CORE to be your go-to HVAC partner.
125mm OD Rubber Lined Clip (125 - 130mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
10mm Brass Compression Stop End. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
41mm x 41mm Galvanised Channel Top Hat Bracket. Designed to primarily support and fix together Channel lengths in a metal framework situation. Made from Mild Steel with a 6mm think profile. Manufactured in accordance with BS6946:1988. Pre drilled with 14mm fixing holes allowing the use of bolts and threaded rod to facilitate fixings - GB4040
28mm Solder Ring Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
Galvanised Flat 4 Hole 'T' Bracket. Designed to primarily support and fix together Channel lengths in a metal framework situation. Made from Mild Steel with a 6mm think profile. Manufactured in accordance with BS6946:1988. Pre drilled with 14mm fixing holes allowing the use of bolts and threaded rod to facilitate fixings GB07
22mm Endfeed Cap. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
22mm x 3/4" Brass Compression Male Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
22mm Endfeed 45 Degree Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
15mm x 1/2" Endfeed Bent Tap Connector. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
22mm x 3/4" Brass Compression Female Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
15mm x 1/2" Compression Male Adaptor Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
15mm x 1/2" Solder Ring Tap Connector. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
25.0 x 260mm CORE SDS Drill Bit - Suitable for work on building sites and general DIY tasks. It is compatible with all SDS rotary hammer drills and comes with a carbide tip which increases its performance.
22mm Endfeed Street Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
10mm x 8mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
15mm Brass Compression Stop End. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
22mm x 15mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
100nb CORE PN10-16 Inner Bolt Circle (IBC) PG-T Graphite Gasket 1.5mm - Excellent mechanical strength with a wide temperature range and outstanding stress retention properties making it ideal for demanding applications. Suitable for sealing a wide range of fluids including steam, hydrocarbons and most chemicals.
15mm x 8mm Endfeed Insert Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
28mm x 22mm Endfeed Insert Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
28mm Compression Internal Blanking Plug. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
41mm x 41mm Galvanised Single Z Bracket. Designed to primarily support and fix together Channel lengths in a metal framework situation. Made from Mild Steel with a 6mm think profile. Manufactured in accordance with BS6946:1988 - GB27
By clicking ‘OK’ or by continuing to browse, you agree to the use and storing of cookies to enhance the website experience. To find out more about how we use the cookies click the ‘LEARN MORE’ button.
