The CORE brand is committed to providing a variety of HVAC products, all of which represent exceptional quality and true value. Offering customers a competitively priced, trusted alternative to other branded products across various HVAC applications.
"We are thrilled to announce the launch of CORE in 2023, which represents a new chapter in our commitment to innovation and customer service. We believe that CORE is a game-changer for customers servicing the in the HVAC industry," Steve Smith, Managing Director.
All manufacturers selected within the CORE range are trusted suppliers of SBS, so customers can be confident in the brand. With over 125 years of experience in the HVAC industry, SBS have the relevant skillset to understand the performance and pricing required for our valued customer based.
With the distribution network of SBS providing unrivalled service levels, you can trust CORE to be your go-to HVAC partner.
CORE Inhibitor prevents system corrosion and limescale deposition by passivating and protecting bare metal surfaces in commercial heating, chilled & condenser systems, contributing to a longer system life and improved system efficiencies. Our CORE Inhibitor contains a pH buffer to maintain a neutral system water pH.
54mm x 28mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm Solder Ring Stop End. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
High performance biocide and fungicide - CORE Dual Biocide has been specifically designed to prevent the formation & growth of bacterial contamination, algae & micro-organisms in commercial heating, underfloor heating, low temperature & chilled systems. CORE Dual Biocide contains two, separate active ingredients, making it more effective than a single biocidal treatment.
Advanced, high-strength chemical cleaner - CORE Heavy-Duty Cleaner has been specifically designed for the rapid cleaning of all heating, chilled and condenser systems, removing system sludge, debris and scale. CORE Heavy-Duty Cleaner can be left in the system for up to 7 days only. The system should then be thoroughly drained & flushed before refilling with clean system water. Immediate dosing of CORE Inhibitor should then be carried out to fully protect the system.
This one-handed pipe wrench comes with replaceable jaws and hooks. Its ideal for screwing, loosening and securing pipes from between 1.1/2" to 8". A robust and durable tool for many different applications from general DIY, Plumbing, Automotive and Engineering. The pipe wrench features a lightweight aluminium body with high-strength double-T profile, it is 40% lighter than its steel counterpart.
42mm Solder Ring Obtuse Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
Super 2" Steel Pipe Cutters, cuts 10-60mm pipe. Tempered cutting wheel made from high alloy steel ensures Burr-free cutting allowing for immediate threading.
25mm (1") Flexible Rubber Bellow (EPDM) BSP Female Threaded Union, Galvanised Carbon Steel Ends PN16 BS21. Maximum Working Pressure 16 Bar - Working Temperature -10°C to +90°C. Suitable for L.T.H.W. and chilled water systems.
28mm Compression Stop End Brass Chrome Plated. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
35mm x 1 1/4" Endfeed Copper x Female Iron Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 35mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 15mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
42mm Solder Ring Equal Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
22mm x 3/4" Solder Ring Male Union Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
CORE Leave-In Cleaner has been specifically designed to lift & mobilise magnetic & non-magnetic system contaminants including biofilms, helping to promote their capture via a magnetic & non-magnetic system filter which must be present on any system that this product is dosed with. CORE Leave-In Cleaner can remain in the system, with no need to drain & flush after treatment.
25nb (1") Brass Ball Valve complete with Thermal Extension, Screwed BSP Parallel F/F Ends (ISO 228/1). Full bore, Anti-blow-out stem. Max Pressure 40 Bar (Liquids), 5 Bar (Gas). Working temperature -20°C to +140°C (Liquids), -20°C to +60°C (Gas). WRAS approved. EN331 approved (GAS).
25nb (1") Brass Ball Valve complete with Thermal Extension, Screwed BSP Parallel F/F Ends (ISO 228/1). Full bore, Anti-blow-out stem. Max Pressure 40 Bar (Liquids), 5 Bar (Gas). Working temperature -20°C to +140°C (Liquids), -20°C to +60°C (Gas). WRAS approved. EN331 approved (GAS).
35mm Compression Elbow Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm x 22mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
35mm Compression Tank Connector. Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
42mm Brass Compression Socket. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
42mm Compression Socket Brass (DZR) Dezincification Resistant 910. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
Rapid, powerful chemical cleaner - CORE System Cleaner has been specifically designed for cleaning new & existing heating, chilled and condenser systems, removing system sludge, debris and scale. For maximum flexibility, CORE System Cleaner can be left in the system for up to 28 days. The system should then be thoroughly drained & flushed before refilling with clean system water. Immediate dosing of CORE Inhibitor should then be carried out to fully protect the system.
25nb (1") 2 Piece DZR Ball Valve Full Bore, Screwed BSP Taper F/F Ends (ISO 7/1) or NPT (ANSI B1.20.1). Anti-blow-out stem, Max Pressure 40 Bar, Working temperature -20°C to +130°C, WRAS approved.
Super 1.1/4" Steel Pipe Cutters, cuts 10-42mm pipe. Tempered cutting wheel made from high alloy steel ensures Burr-free cutting allowing for immediate threading.
35mm x 15mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
42mm Compression Stop End Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
22nb DZR Brass Ball Valve, Full Bore, Press Fit Connection, Suitable for cold pressure connection to stainless steel, copper and carbon steel pipes. Operating working pressure 17-24 Bar, Working temperature -10°C to +140°C, WRAS approved, 5 Year Warranty.
22nb DZR Brass Ball Valve, Full Bore, Press Fit Connection, Suitable for cold pressure connection to stainless steel, copper and carbon steel pipes. Operating working pressure 17-24 Bar, Working temperature -10°C to +140°C, WRAS approved, 5 Year Warranty.
54mm x 28mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
22nb DZR Brass Ball Valve, Full Bore, Press Fit Connection, Suitable for cold pressure connection to stainless steel, copper and carbon steel pipes. Operating working pressure 17-24 Bar, Working temperature -10°C to +140°C, WRAS approved, 5 Year Warranty.
35mm x 1 1/4" Compression x Male Elbow. Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
42mm Endfeed Equal Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
35mm x 28mm x 22mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
35mm x 15mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
35mm x 28mm x 28mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
By clicking ‘OK’ or by continuing to browse, you agree to the use and storing of cookies to enhance the website experience. To find out more about how we use the cookies click the ‘LEARN MORE’ button.
