The CORE brand is committed to providing a variety of HVAC products, all of which represent exceptional quality and true value. Offering customers a competitively priced, trusted alternative to other branded products across various HVAC applications.
"We are thrilled to announce the launch of CORE in 2023, which represents a new chapter in our commitment to innovation and customer service. We believe that CORE is a game-changer for customers servicing the in the HVAC industry," Steve Smith, Managing Director.
All manufacturers selected within the CORE range are trusted suppliers of SBS, so customers can be confident in the brand. With over 125 years of experience in the HVAC industry, SBS have the relevant skillset to understand the performance and pricing required for our valued customer based.
With the distribution network of SBS providing unrivalled service levels, you can trust CORE to be your go-to HVAC partner.
50nb WRAS approved Screwed Axial bellow with 25 mm movement. Standard 10 Bar (up to 16 Bar - dependent on PED conditions). For steal and copper pipe systems 120°C
50mm Rubber Lined Clip M8/M10 (60-64mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
50nb DZR Brass Fixed Orifice Double Reg Valve BSP Parallel (ISO 228/1), handwheel with shut off function. Max pressure 25 Bar. Working temp: -10°C to +120°C. Conforms to BS 7350-WRAS approved
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
54mm Brass Compression Socket. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Compression Brass Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Compression Elbow Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Brass Compression Ring. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Copper Compression Ring. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Compression Socket Brass (DZR) Dezincification Resistant 910. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Compression Stop End Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Compression Tank Connector. Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm Compression Tee Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Gas M-profile copper press-fit system, suitable for family 2 and family 3 fuel gas systems, including natural gas, LPG, and bio gases. Designed for safe and efficient gas installations. Temp range: -20°C to 70°C. Max Pressure: 5 bar (outdoor) or 1 bar (indoor). Manufactured to EN 1254 standards
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
54mm Endfeed 45 Degree Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Endfeed 45 Degree Street Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Endfeed Cap. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Endfeed Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Endfeed Slip Socket. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Endfeed Socket. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Endfeed Street Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Endfeed Equal Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm Solder Ring Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm Solder Ring Equal Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm Solder Ring Obtuse Elbow. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm Solder Ring Socket. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm Solder Ring Stop End. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm OD Rubber Lined Clip M8/M10 (53-59mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
54mm x 2" Solder Ring Male Union Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 15mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm x 15mm Endfeed Insert Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 15mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 15mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 15mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 2" Compression Female Adaptor. Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm x 2" Compression Male Adaptor. Brass (DZR) Dezincification Resistant 911. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm x 2" Compression x Female Elbow. Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm x 2" Compression x Male Elbow. Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm x 2" Endfeed Copper x Female Iron Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 2" Endfeed Copper x Male Iron Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 2" Endfeed Copper x Male Iron Union Adaptor. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 2" Solder Ring Straight Female Connector. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 2" Solder Ring Straight Male Connector. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 22mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
54mm x 22mm Endfeed Insert Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 22mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 22mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 22mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 28mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
54mm x 28mm Endfeed Insert Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 28mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 28mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 28mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 35mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
54mm x 35mm Endfeed Insert Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 35mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 35mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 35mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 42mm Compression Reducing Set, Brass (DZR) Dezincification Resistant. Suitable for hot and cold drinking water, heating and chilled water systems. Max Pressure 20 Bar - Working temperature -15°C to +120°C. Manufactured to comply with EN 1254-2, WRAS approved.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
54mm x 42mm Endfeed Insert Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 42mm Endfeed Reducing Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Designed for solder and brazing applications, ideal for connecting copper tubes. WRAS approved.
54mm x 42mm Solder Ring Reducer. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
54mm x 42mm Solder Ring Reducing Branch Tee. Suitable for hot and cold drinking water, heating and chilled water systems. Contains lead-free solder, ensures a quick and secure fitting, ideal for connecting copper tubes. Max Pressure 16 Bar - Working temperature -40°C to +110°C. Manufactured to comply with EN 1254-1, WRAS approved.
Cast Iron Wafer Check Valve PN16. Universal flange mounting to suit BS EN1092 PN10 / PN16 and ANSI B16.1 Class 125. Epoxy coat finish. 16 Bar rated with working temp of -10°C to +120°C. WRAS application: -10°C to +85°C
Cast Iron Flanged Y Strainer. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS EN558-1 Series 1. DN50 & DN65 square drain port. DN80-DN600 circular drain port. 16 Bar rated with a temperature range of -10°C to +230°C
Ductile Iron PN16 Gate Valve. Flange mounting to EN1092-2 PN16. Face-to-face length to EN558-1 Series 3. Non-rising stem. Clockwise closing. 16 Bar rated & with temp range of 0°C to +80°C.
Cast Iron Swing Check Valve. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS5153 (BS EN558-1 Series 10). 16 Bar rated with a temperature range of. -10°C to +230°C
65mm Rubber Lined Clip M8/M10 (75-80mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
65nb (2.1/2") 2 Piece Brass Ball Valve Screwed BSP Parallel F/F Ends (ISO 228/1). Full bore, Anti-blow-out stem. Max Pressure 25 Bar (Liquids), 5 Bar (Gas). Working temperature -20°C to +140°C (Liquids), -20°C to +60°C (Gas). WRAS approved. EN331 approved (GAS).
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
67mm OD Rubber Lined Clip M8/M10 (63-67mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
M-Profile copper press-fit system, suitable for potable water and heating installations. Temp range: -20°C to 110°C. Max pressure: 16 bar. Approved to: KIWA, Reg4 & WRAS. Manufactured to EN 1254 standards.
Cast Iron Wafer Check Valve PN16. Universal flange mounting to suit BS EN1092 PN10 / PN16 and ANSI B16.1 Class 125. Epoxy coat finish. 16 Bar rated with working temp of -10°C to +120°C. WRAS application: -10°C to +85°C
Cast Iron Flanged Y Strainer. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS EN558-1 Series 1. DN50 & DN65 square drain port. DN80-DN600 circular drain port. 16 Bar rated with a temperature range of -10°C to +230°C
Ductile Iron PN16 Gate Valve. Flange mounting to EN1092-2 PN16. Face-to-face length to EN558-1 Series 3. Non-rising stem. Clockwise closing. 16 Bar rated & with temp range of 0°C to +80°C.
Cast Iron Swing Check Valve. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS5153 (BS EN558-1 Series 10). 16 Bar rated with a temperature range of. -10°C to +230°C
80mm Rubber Lined Clip M8/M10 (88-92mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
By clicking ‘OK’ or by continuing to browse, you agree to the use and storing of cookies to enhance the website experience. To find out more about how we use the cookies click the ‘LEARN MORE’ button.
