The CORE brand is committed to providing a variety of HVAC products, all of which represent exceptional quality and true value. Offering customers a competitively priced, trusted alternative to other branded products across various HVAC applications.
"We are thrilled to announce the launch of CORE in 2023, which represents a new chapter in our commitment to innovation and customer service. We believe that CORE is a game-changer for customers servicing the in the HVAC industry," Steve Smith, Managing Director.
All manufacturers selected within the CORE range are trusted suppliers of SBS, so customers can be confident in the brand. With over 125 years of experience in the HVAC industry, SBS have the relevant skillset to understand the performance and pricing required for our valued customer based.
With the distribution network of SBS providing unrivalled service levels, you can trust CORE to be your go-to HVAC partner.
CORE Leave-In Cleaner has been specifically designed to lift & mobilise magnetic & non-magnetic system contaminants including biofilms, helping to promote their capture via a magnetic & non-magnetic system filter which must be present on any system that this product is dosed with. CORE Leave-In Cleaner can remain in the system, with no need to drain & flush after treatment.
CORE Leave-In Cleaner has been specifically designed to lift & mobilise magnetic & non-magnetic system contaminants including biofilms, helping to promote their capture via a magnetic & non-magnetic system filter which must be present on any system that this product is dosed with. CORE Leave-In Cleaner can remain in the system, with no need to drain & flush after treatment.
Advanced, high-strength chemical cleaner - CORE Heavy-Duty Cleaner has been specifically designed for the rapid cleaning of all heating, chilled and condenser systems, removing system sludge, debris and scale. CORE Heavy-Duty Cleaner can be left in the system for up to 7 days only. The system should then be thoroughly drained & flushed before refilling with clean system water. Immediate dosing of CORE Inhibitor should then be carried out to fully protect the system.
High performance anti-freeze and protector - CORE Glycol Anti-Freeze is a monopropylene, glycol-based anti-freeze, designed to prevent freezing in all types of water which incorporates our CORE INHIBITOR, helping to protect underfloor heating systems, chillers, boilers and their associated chilling & heating systems against corrosion & scale formation and maximising the heat transfer properties of the system. CORE Glycol Anti-Freeze offers protection down to -22C at 40% concentration.
Rapid, powerful chemical cleaner - CORE System Cleaner has been specifically designed for cleaning new & existing heating, chilled and condenser systems, removing system sludge, debris and scale. For maximum flexibility, CORE System Cleaner can be left in the system for up to 28 days. The system should then be thoroughly drained & flushed before refilling with clean system water. Immediate dosing of CORE Inhibitor should then be carried out to fully protect the system.
High performance biocide and fungicide - CORE Dual Biocide has been specifically designed to prevent the formation & growth of bacterial contamination, algae & micro-organisms in commercial heating, underfloor heating, low temperature & chilled systems. CORE Dual Biocide contains two, separate active ingredients, making it more effective than a single biocidal treatment.
High performance biocide and fungicide - CORE Dual Biocide has been specifically designed to prevent the formation & growth of bacterial contamination, algae & micro-organisms in commercial heating, underfloor heating, low temperature & chilled systems. CORE Dual Biocide contains two, separate active ingredients, making it more effective than a single biocidal treatment.
Cast Iron Wafer Check Valve PN16. Universal flange mounting to suit BS EN1092 PN10 / PN16 and ANSI B16.1 Class 125. Epoxy coat finish. 16 Bar rated with working temp of -10°C to +120°C. WRAS application: -10°C to +85°C
Cast Iron Swing Check Valve. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS5153 (BS EN558-1 Series 10). 16 Bar rated with a temperature range of. -10°C to +230°C
Cast Iron Flanged Y Strainer. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS EN558-1 Series 1. DN50 & DN65 square drain port. DN80-DN600 circular drain port. 16 Bar rated with temperature range of -10°C to +230°C
Ductile Iron PN16 Gate Valve. Flange mounting to EN1092-2 PN16. Face-to-face length to EN558-1 Series 3. Non-rising stem. Clockwise closing. 16 Bar rated & with temp range of 0°C to +80°C.
100mm OD Rubber Lined Clip (99-105mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
100mm Rubber Lined Clip M8/M10 (113-118mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
100nb (4") 2 Piece Brass Ball Valve Screwed BSP Parallel F/F Ends (ISO 228/1). Full bore, Anti-blow-out stem. Max Pressure 25 Bar (Liquids), 5 Bar (Gas). Working temperature -20°C to +140°C (Liquids), -20°C to +60°C (Gas). WRAS approved. EN331 approved (GAS).
108mm OD Rubber-Lined Clip M8/M10 (107-112mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
10mm Rubber Lined Clip M8/M10 (15-19mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
Cast Iron Wafer Check Valve PN16. Universal flange mounting to suit BS EN1092 PN10 / PN16 and ANSI B16.1 Class 125. Epoxy coat finish. 16 Bar rated with working temp of -10°C to +120°C. WRAS application: -10°C to +85°C
Cast Iron Swing Check Valve. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS5153 (BS EN558-1 Series 10). 16 Bar rated with a temperature range of. -10°C to +230°C
Cast Iron Flanged Y Strainer. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS EN558-1 Series 1. DN50 & DN65 square drain port. DN80-DN600 circular drain port. 16 Bar rated with temperature range of -10°C to +230°C
Ductile Iron PN16 Gate Valve. Flange mounting to EN1092-2 PN16. Face-to-face length to EN558-1 Series 3. Non-rising stem. Clockwise closing. 16 Bar rated & with temp range of 0°C to +80°C.
125mm OD Rubber Lined Clip (125 - 130mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
125mm Rubber Lined Clip M8/M10 (136-140mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
12mm OD Rubber Lined Pipe Clamp M8/M10 (10-14mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
150mm OD Rubber Lined Clip M8/M10 (145-152mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
150mm Rubber Lined Clip M8/M10 (159-168mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
159mm OD Rubber-Lined Clip M8/M10 (151-164mm). Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
15nb WRAS approved Screwed Axial bellow with 25 mm movement. Standard 10 Bar (up to 16 Bar - dependent on PED conditions). For steal and copper pipe systems 120°C
15mm Rubber Lined Clip M8/M10 (20-24mm) Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
168mm OD Rubber-Lined Clip M8/M10 (168-175mm). Mild steel with BZP finish. For use with copper and plastic tube. Rubber lining tested to DIN4109 for acoustic use
Cast Iron Wafer Check Valve PN16. Universal flange mounting to suit BS EN1092 PN10 / PN16 and ANSI B16.1 Class 125. Epoxy coat finish. 16 Bar rated with working temp of -10°C to +120°C. WRAS application: -10°C to +85°C
Cast Iron Wafer Check Valve PN16. Universal flange mounting to suit BS EN1092 PN10 / PN16 and ANSI B16.1 Class 125. Epoxy coat finish. 16 Bar rated with working temp of -10°C to +120°C. WRAS application: -10°C to +85°C
Cast Iron Swing Check Valve. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS5153 (BS EN558-1 Series 10). 16 Bar rated with a temperature range of. -10°C to +230°C
Cast Iron Flanged Y Strainer. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS EN558-1 Series 1. DN50 & DN65 square drain port. DN80-DN600 circular drain port. 16 Bar rated with temperature range of -10°C to +230°C
Ductile Iron PN16 Gate Valve. Flange mounting to EN1092-2 PN16. Face-to-face length to EN558-1 Series 3. Non-rising stem. Clockwise closing. 16 Bar rated & with temp range of 0°C to +80°C.
Cast Iron Flanged Y Strainer. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS EN558-1 Series 1. DN50 & DN65 square drain port. DN80-DN600 circular drain port. 16 Bar rated with temperature range of -10°C to +230°C
Cast Iron Swing Check Valve. Flange mounting PN16 only. Flange conforms to BS EN1092 PN16. BS5153 (BS EN558-1 Series 10). 16 Bar rated with a temperature range of. -10°C to +230°C
Ductile Iron PN16 Gate Valve. Flange mounting to EN1092-2 PN16. Face-to-face length to EN558-1 Series 3. Non-rising stem. Clockwise closing. 16 Bar rated & with temp range of 0°C to +80°C.
By clicking ‘OK’ or by continuing to browse, you agree to the use and storing of cookies to enhance the website experience. To find out more about how we use the cookies click the ‘LEARN MORE’ button.
